Thread Tools. Satycon HD Find all posts by elgeneral. Firmware Satycon HD V1. No Support via PM sistem with questions that can be answered in open forum. Note: Viewing Pay TV without a valid subscription is illegal. All the files available here are kept for experimental and educational purpose only.
Gracias tani1 Infos New firm v Randy next version Generally, you can each BA on each of the 3 boxes flash. This is the most important foreign currency for each receiver adjusted fixed is. When you flash the firmware, the manufacturer ID of the query box, and only if they match, the software can also easily flash. Patched the 3 boxes are equal.
Analog this guide. To play the emu firmware: - Receiver via null modem cable to the PC. Bin file - The screen displays follow - Receiver switch off the network. Important: Even if the Setedit OK message comes, the receiver off or disconnect from power, it will be in the DR processed receiver yet!
This update is successful, then appears on the receiver display the message "GOOD" what the receiver newly bootet. Dieses necessarily wait! With some versions of firmware after the "GOOD" does not automatically rebooted. If using a USB stick flashed, the receiver remains in "Good" are, then 1 minute wait at the box off the power switch, USB stick off and on again. Before patching, please list your channel from the receiver read, because when these patches will be overwritten.
If locked, please call the dealer for help. Maturity Level In Maturity level submenu, you can change the smart card s maturity level, which will affect whether scrambled program is granced or not. Subscription Status Know the detail information of Subscription Status. Event Status Know the detail information of Event Status.
Token Status Know the detail information of Token Status. E-Mail All E-mails from the operator are listed in this window. Product Ordering Not available in this software.
If so, please follow the instructions from the Service Provider. If it is done properly, you can enjoy scrambled channels accessed by your CA module and Smartcard. Note: The receiver has 2 slots of 2 CI modules.
Then the receiver detects and shows the CA module names, which you inserted in the slots. Then select slot 1 or slot 2. Note: This information may be different from each Program Provider. So the receiver provides Antenna Direction Help in order for you to have exact information to direct your antenna toward a satellite. In case the location of the satellite is changed, you can re-set the new location. This function is one of the strong point of the receiver.
The time will be displayed relating to the program schedule. Then you can see blue button, if there is details information of the channel. And press Detail blue key key on the RCU, then detail information box will be displayed. User can move the point up and down to select the programs by the right box. You can sort the channels by Favorite, Lock, Scramble and Program name. EPG Electronic Program Guide The receiver provides EPG function for you to get access to the TV Guide or Radio Guide if you are listening to radio channels which will show the titles and other information of the current and next programs on different channels.
The information is only available from the network to which the channel you are watching belongs. First select the channels, which you want to delete, then selected channel number will be marked to X.
If you cancel the selection, press [OK] key again, then the marked number will be back. Press [OK] to delete. Warning: The deleted channel can not be recovered unless you search again. Please be careful when you decide to delete channel. First select the channel, which you want to lock, and press [OK] key and then will be marked at rear of your selected channel name. Note: To perform this function, you should set up the Parental Lock in advance.
Then will be marked at rear of your selected channel name. When you move cursor from one channel to another, PIG will change accordingly. Note: The receiver has 32 volume levels and this shall be controlled from the adjusted volume level of your TV. The current audio condition will be displayed in the channel information.
This is dependent on the transmission of audio signal which supports multi-language. Note: Channel information will be displaying for 6 seconds and disappeared. You can adjust the display time interval from 3 to 30 seconds. The right list show all the programs related to the selected satellite. When one character is chosen, the list in the right side will show all the programs which are beginning with such character. When etc has been chosen, the list in the right side will show all the programs which are not beginning with such character.
When FTA has been chosen, all the free programs stored in the receiver will be listed in the right side. In addition to the above normal function, the receiver provide more convenient channel change function. Then channel list will be displayed on the screen. If press [EXIT] key, the channel list will be disappeared.
Then, press [OK] key to watch the selected channel. When a function item like All is highlighted, a relevant channel list appears on the right of screen. Move the cursor up and down and press [OK] for the programs desired to view program and exit the current window. Move the cursor to function list by pressing Volume-.
Select ON of Install Lock. Enter new password. Exit this menu. Then Enter Password Box will be displayed. Unless enter correct password, you can not run any menu. Note: Default password is Warning: Do not forget your password in order not to fail to operate the receiver. Warning: You will lose all of data and information which was installed. And also you can protect your installed data and information using Install Lock.
Select ON of Parental Lock. Warning: Once you change password, please do not forget and keep well. But if your receiver is connected to other receiver through Loop Through support, you should check which receiver is connected directly to LNB. The lowest value 1 means the most transparency, the highest value 10 means opacity. Do the setups as you like. If you press [OK] key, then the channel list is displayed. You can select one channel of the list, the selected channel starts whenever you turn on the receiver.
You can see the information of selected satellite in the right side. And then you can move to those columns to change the value. The receiver will automatically search the channel for TV and Radio and during this procedure you can see the already searched channels in the Searched List Box on the screen. Using arrow key on the RCU, you can edit the satellite name. And then you can move into those columns to change the value. If the satellite is locked correctly, the color of signal label bar will be changed to yellow.
If you have universal LNB, select Univ. If you have a dual LNB, enter the proper value in the both of value box. Please select [OK] button on the screen and then wait for saving a data. System will search all TV and Radio programs under this satellite.
Through this menu, you can position your antenna correctly. In case the location of the satellite is changed, you can reset the new location. Once [OK] key is pressed on this button, system will position your antenna to the satellite automatically. Please in patience to wait the process. To set West limit, take the same steps as East limit. After that, please reset West limit same as before.
You can also use the numeric keys on the RCU to enter numeric value. Executes the selected item in the menu screen or enters the desired value in any input mode.
0コメント