The WAN Mode screen displays. This screen gives you two choices for accessing the external Internet connection. This one-to-one inbound mapping is configured using an inbound firewall rule.
If your ISP has allocated a number of static IP addresses to you, and you have assigned one of these addresses to each PC, you can choose classical routing.
Or, you can use classical routing for routing private IP addresses within a campus environment. However, if your Internet account uses a dynamically assigned IP address, you will not know in advance what your IP address will be, and the address can change frequently—hence, the need for a commercial DDNS service, which allows you to register an extension to its domain, and restores DNS requests for the resulting FQDN to your frequently-changing IP address. Click the tab of the DNS service you want to enable.
Each DNS service provider requires registration. After registration you can configure the required settings on the corresponding screen for the DNS service. Access the website of one of the DNS service providers and set up an account. A link to each DNS service provider is located to the right of the tabs see the option arrow. After setting up your account, return to the screen for the DNS service.
On the screen for the DNS service, select the Yes radio button, and complete the required fields for the DNS service that you selected:. Enter the account information for the service you have chosen for example, user name, password, key, or domain. If your DNS service provider allows the use of wild cards in resolving your URL, you may check the Use wildcards checkbox to activate this feature. If it appears, you can select the Update every 30 days checkbox to enable a periodic update.
Click Apply to save your configuration or click Reset to return to the previous settings. Click the Advanced option arrow at the right of the tabs to display the Broadband Advanced Options screen. Edit the default information you want to change. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection. If you cannot establish an Internet connection and the Internet LED blinks continuously, you may have to manually select the port speed.
If you know that the Ethernet port on your broadband modem supports BaseT, select. Use the half-duplex settings unless you are sure you need full duplex. Each computer or router on your network has a unique bit local Ethernet address.
The default is Use Default Address. IP addresses will be assigned to the attached PCs from a pool of addresses that you must specify. Each pool address is tested before it is assigned to avoid duplicate addresses on the LAN. Otherwise, leave it checked. Using the default addressing scheme, you should define a range between The default values are suitable for most users and situations.
The LAN Setup screen displays. You must then open a new connection to the new IP address and log in again. For example, if you change the default IP address The subnet mask specifies the network number portion of an IP address.
Your VPN firewall will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing subnetting, use Specifies the first of the contiguous addresses in the IP address pool. The IP address Specifies the last of the contiguous addresses in the IP address pool. This specifies the duration for which IP addresses will be leased to clients. Enter the following settings:. Specifies the distinguished name dn at which to start the search, specified as a sequence of relative distinguished names rdn , connected with commas and without any blank spaces.
For most users, the search base is a variation of the domain name. For example, if your domain is yourcompany. Specifies the port number that the LDAP server is using. Leave this field blank for the default port. In the Advanced Settings section, configure the following settings:. Click Apply to save your settings or click Reset to discard any changes and revert to the previous configuration. Collectively, these entries make up the Network Database. These requests also generate an entry in the Network Database.
The local network is scanned using standard methods such as ARP. This will detect active devices which are not DHCP clients. However, sometimes the name of the PC or device cannot be accurately determined, and will be shown as Unknown.
You can manually enter information about a network device. Instead, you can just select the desired PC or device. All IP address assignments made by the DHCP Server will be maintained until the PC or device is removed from the database, either by expiry inactive for a long time or by you. Click the LAN Groups tab. The LAN Groups screen displays. For each computer or device, the following fields are displayed:. The name of the computer or device.
In this case, the name can be edited manually for easier management. The current IP address of the computer. If a computer is assigned a static IP address, you must to update this entry manually when the IP address of the computer changes. Each PC or device can be assigned to a single group. By default, a computer is assigned to the first group Group 1. To change the group assignment by selecting the Edit button in the Action column. Allows modification of the selected entry.
To add computers to the network database manually, make the following selections:. From the pull-down menu, choose how this device receives its IP address:. Enter the IP address that this computer or device is assigned. From the pull-down menu, select the group to which the computer has to be assigned. Group 1 is the default group. Click Add to add the new entry to the network database. You can rename these group names to be more descriptive, such as Engineering or Marketing.
The Network Database Group Names screen appears. Select the radio button next to any group name to make that name active for editing. Type a new name in the field. Select and edit other group names if desired.
Click Apply to save your settings. Reserved IP addresses should be assigned to servers or access points that require permanent IP settings. Click the LAN Multi-homing tab. The LAN Multi-homing screen displays.
This is the gateway for computers that need to access the Internet. IPv4 Subnet Mask. The Edit button allows you to make changes to the selected entry. Click Add. Example of correct addresses:. DMZ IP address: This zone can be used to host servers such as a Web server, FTP server, or email server, for example and give public access to them. The DMZ port feature is also helpful when using some online games and videoconferencing applications that are incompatible with NAT.
The VPN firewall is programmed to recognize some of these applications and to work properly with them, but there are other applications that may not function well. A separate firewall security profile is provided for the DMZ port that is hardware independent of the standard firewall security used for the LAN.
The DMZ Setup screen displays. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Start a New Discussion. Subscribe for Updates. Join Now Log In Help. All forum topics Previous Topic Next Topic. Port forwarding on FVSG. Hi, i have problem to open ports on my FVS, anyone help me? I attach some screenshot. Where is the error??? Message 1 of Me too. Turn of f your computer. Turn of f and unplug the modem. Locate the cable modem cable in the diagram that connects your modem.
Disconnect the cable at the computer end only , point A in the diagram. Insert the other end into the LAN port of. Y our cables are connected, and you are ready to restart your network. Restart your network in the correct sequence. VPN's are a pretty complex machine.
Essentially they create an encrypted tunnel over the internet between two points and allow each site to talk with each other as if they are all on the same private network. Hence the name Virtual Private Network. When you get into the gritty and technical details you get into some really heavy stuff. Even I don't waste a lot of time with it. I use the wizards and call it a day. Those firewalls come with a wizard to set up a vpn follow the wizard, repeat the setting on the other location.
Make sure you have static IP addresses at each location, or at least a dyndns account or similar for each place. Along with getting it to "work", I also would like to learn more about how and why it works. Now about the firewall questions..
0コメント